GETTING STARTED
1.
Charging & Powering Baby Monitor
1)
Connect the monitor adapter to the monitor and a power outlet.
2)
U
np
lug
t
h
e
unit
wh
e
n
it
s
p
o
we
r
in
di
c
at
o
r
turn
s o
f
f,
in
di
c
atin
g
a
full
c
h
ar
g
e
.
3)
Press the Power button on the monitor to power on with the power indicator
lighting green.
2.
Powering Camera
1)
Connect the camera to power source via the Micro-USB cable and
c
ame
r
a a
d
ap
t
e
r
.
2)
Slide the Power Switch on camera to power on. Make sure the power
indicator light is green.
3.
Pairing the Baby Monitor & the Camera
By default, one camera has been paired with the monitor when manufactured.
When you power on the monitor and camera, the two will automatically pair.
To add more cameras, press the Pair Button at the bottom of the camera,
press Menu button, select through
->
->
,
and then the monitor will
auto-pair with the camera.
4.
Placing the Camera
P
l
a
c
e
t
h
e
c
ame
r
a
1
.
5-
2m
/
4.
9-6
.6f
t
a
w
ay
fr
o
m
yo
ur
b
aby
f
o
r
s
af
e
t
y
r
e
aso
n
and for a better view when in night vision mode.
5.
Wall Mounting Camera
1)
Select the spot to mount the camera, keeping it beyond your baby’s reach.
2)
Insert the screw (not included) pre-installed on wall into the mounting hole
of the camera.
05 06
It
’
s s
t
r
o
n
gl
y
r
e
c
o
mm
e
n
d
e
d
t
o
use
a s
c
r
ew
an
d
s
c
r
ew
an
c
h
o
r
.
D
o
n
’t
release the camera until you’re sure it is firmly mounted.
·
On
c
e
t
h
e
y’
r
e
p
aire
d
suc
c
e
s
sfull
y
,
t
h
e
c
ame
r
a
numb
e
r
wit
h
i
c
o
n
1 will be shown at the top left.
·
Microphone feedback might occur when the monitor is too close
to the camera. Please keep them at least 1.5m / 4.9ft apart.
·
It is recommended to pair in the baby's room, or wherever you
intend to place the camera.
·
Onl
y
use
t
h
e
p
o
we
r
a
d
ap
t
e
r
s
in
c
lud
e
d
in
t
h
e
p
a
c
k
ag
e
.
·
Do not place the camera and power cord within the reach of your
b
aby
.
To Next Page
Loading...
Need help?
General
