TIP
Using your machine Using your machine
Assembling your vacuum cleaner
Push the handle into
the body of the vacuum
cleaner. The handle will
click into position when
correctly tted.
Fit the battery onto the
vacuum cleaner (below the
dirt container). The battery
will click into position
when correctly tted.
Remove the lter insert by
pressing the dirt container release
button, remove dirt container o
the vacuum cleaner, turn the dirt
container lid anti-clockwise to
remove the lter insert.
Remove tag attached to
lter, ret lter with the
tab at the bottom into
vacuum cleaner.
The battery can remain on the
battery charger once fully charged.
You may want to charge the spare
battery so it is ready to use.
Using your Air Cordless
Press the on/o button
to turn the vacuum
cleaner on.
Place your foot on the
base and pull backwards
to recline.
Press the brushbar button
to activate the brushbar if
on carpets.
Stand the vacuum cleaner
in the upright position to
use the hose. The brushbar
will stop.
The brushbar should be ON for
carpets and OFF for hard oors.
IMPORTANT
To Next Page
Loading...
Need help?
General
