Vax Air Lift Steerable UCPESHV1 - Cleaning the Separator; Post-Motor Filter Maintenance

Cleaning the separator
Twist the post-motor
lter cover anti clockwise
and remove.
Check the post-motor lter
for any discolouration.
Lift and remove the
post-motor lter.
Lift the dirt container lid
release clip. In a hinge
like manor lift the dirt
container lid.
Pull the pre-motor lter tab
and remove the lter from
the dirt container.
Lift and remove separator
out of dirt container. Using
a soft brush remove any
dirt/debris from separator.
Re t the separator making
sure the semi circular tab
on the separator ts into
the groove on the
dirt container.
Taking care of your machine
Post-motor lter maintenance
IMPORTANT: The post-motor lter is designed to oer long life with no maintenance. The lter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the lter as this will
damage the lter.
Don’t use your vacuum
cleaner without all of the
lters in place.
CAUTION