Getting Started
5
Attach hose to unit.
Attach concentration nozzle to
handle or extension tube.
Attach extension tube to handle.
1. Push small tools onto
concentration nozzle
aligning arrows.
2. Twist clockwise to fit.
Concentration nozzle must
be attached before fitting the
small tools.
Attach extension tube to floor head.
Attach extension tubes together.
To remove the tube/s press the
white release button.
Assembling your steam cleaner
Attaching small tools
IMPORTANT: Do not attach/remove accessories while steamer is in use. (Hot water may drip out of the
accessory-risk of scalding)
To Next Page
Loading...
Need help?
General
