11
Turn the rinse/wash dial
to RINSE. Only water
is released to remove
solution residue.
Squeeze the trigger to
release water.
Press the recline pedal and
pull the handle backwards.
For best results apply water
on the forward stroke and
release the trigger on the
backward stroke to pick
up water/solution. For a
dryer finish, follow with an
additional dry stoke with no
trigger pressed.
USING YOUR MACHINE
Rinsing the carpet
Plug the machine into the
mains and press the On/Off
pedal to switch on.
IMPORTANT: Optional step. To extract any remaining solution from your carpet, rinse your carpets with water only.
To Next Page
Loading...
