Vax power 7 VCP7P2400 - Getting Started; Assembling your vacuum cleaner; Operating the appliance

5
Getting Started
Keep your Vax like new
Assembling your vacuum cleaner
Operating the appliance
NOTE: The Turbobrush, hard  oor tool, crevice tool, upholstery tool and dusting brush can all be attached directly to the
telescopic tube or hose handle. The TurboTool should be attached via the supplied connector.
Hard  oors
Carpets
NOTE: Fully unwind the power cord.
A yellow mark on the cord indicates
the recommended cord length. Do
not exceed the cord length beyond
the yellow mark.
!
!
!
!
!
!
!
!
1
2
IMPORTANT: The condition of the  lters a ects the
performance of your machine. Please check, clean and
replace  lters periodically (depending on the level of
use). For full cleaning instructions, see pages 6 and 7.
IMPORTANT: Do not use the vacuum cleaner with
blocked  lters and without all of the  lters in place.
NOTE: Adjust the variable power dial
to increase or decrease the suction.