Vax power 7 VCP7P2400 - Maintenance; Packing away and storage; Emptying and cleaning the dirt container; Cleaning the pre-motor filter

6
IMPORTANT: Water temperature should not exceed 40°C when washing the pre-motor  lter. Allow to dry completely
before replacing in the vacuum cleaner.
Maintenance (Keep your Vax as good as new)
Packing away and storage
Cleaning the pre-motor  lter
Emptying and cleaning the dirt container
24hr
NOTE: For convenience there is a parking slot located at the rear of the vacuum cleaner where the  oor head and tubes
can be attached for storage and carrying.
tap
40�C max
!
!
!
!
1
1
2
2
WARNING: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling, opening
or emptying the dirt container or before connecting/disconnecting the attachments.
IMPORTANT: Filters need to be cleaned everytime you empty the dirt container for best cleaning results. Do not use
your vacuum cleaner with blocked  lters and without ALL the  lters in place.
NOTE: Tap to remove
excess dirt for a quick
clean.
NOTE: Wash when
a deeper clean is
needed.
vax.com.au