Vax power 7 VCP7P2400 - Cleaning the shroud; Cleaning the post-motor filter

7
Maintenance (Keep your Vax as good as new)
NOTE: Tap to clean.
Cleaning the post-motor  lter
Cleaning the shroud
24hr
NOTE: The shroud isaccessed by removing the dirt container lid and is located underneath the pre-motor  lter.
tap
tap
40�C max
!
!
!
!
WARNING: Do not wash post motor  lter.
IMPORTANT: Water temperature should not exceed 40°C when washing the shroud. Allow to dry completely before
replacing in the vacuum cleaner.