Vax S2 Series - Replacing Filter and Washers; Storage

-
Maintenance (Keep your Vax as good as new)
8
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Replacing the hard water filter
IMPORTANT: The condition of the filter affects the performance of your machine.
Check and change filter (depending on level of use). Do not operate unit without hard water filter in place.
Your machine is fitted with a hard water filter. If you live in an area of hard water the filter will discolour/darken
over time (2). Depending on water hardness and/or frequency of use the filter should be changed every 12
months, or once the filter has completely darkened.
Replacing the washers
IMPORTANT: Allow the unit to cool down fully before performing maintenance or troubleshooting checks.
Over time, the floor head can become loose. You may need to replace the washers at the end of the body unit
with the replacement washers provided.
Hard water filter in unit. Hard water filter removed.
New filter. Old filter-discoloured
and darkened.
Storage
Empty out any remaining water in the tank and clean the external surface with a dry cloth.