Attaching tools
Cord rewind/storage
WARNING: Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
Tools may be attached directly to the hand grip or to the
telescoping wand. Firmly push tool into the hand grip or wand.
Twist tool slightly to tighten or loosen connection.
To return cord for storage,
unplug from wall hold plug
and press down Cord
Release Pedal.
For convenience there is
a parking slot located at the
rear of the vacuum cleaner
where the oor tool and hose
can be parked for carrying
and storage.
Using your machine
To Next Page
Loading...
Need help?
General
