Connect Hose
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
*To purchase consumables and accessories, please visit vax.com.au
CAUTION: Always switch o the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
WARNING: Always turn o this appliance before connecting hose.
IMPORTANT: The exible hose contains electrical wires for connection to the Power Nozzle and should not be used if
damaged, cut, punctured, or wires are exposed.
Keep you Vax like new
IMPORTANT: The condition of the lters a ects the performance of your machine. Please check, clean and replace
lters periodically (depending on the level of use). For full cleaning instructions, see “Cleaning the pre-motor lter”
and “Cleaning the post-motor lter”.
IMPORTANT: Do not use the vacuum cleaner with blocked lters and without all of the lters in place.
Push Hose Connector end (A) into
opening (B) on front of cleaner.
To disconnect hose from cleaner,
press release buttons (C) on sides
of Hose Connector and pull out.
B A
C
To Next Page
Loading...
