Taking care of your machine
Press the twin tank
release button and lift the
twin tank by the handle
Emptying the twin tank
Twist water cap anti-
clockwise and lift to remove
Empty any excess water over
the sink, replace water cap
and turn clockwise to tighten
Hold corner of pad down
with foot and lift steam mop
to peel away
All cleaning pads are machine
washable (Max 40°C) allow to
fully dry before use
Removing cleaning pads
Taking care of your machine
Max 40°C
IMPORTANT: Allow the steam mop to fully cool down before performing any maintenance or troubleshooting checks
Don’t leave water or detergent in the twin tank between uses, as this can eect the machines performance, the twin tank
needs to be emptied and rinsed after each use
To Next Page
Loading...
