Using your machine
Place foot on outer
oor head and gently pull
away steam mop to release
the compact scrub brush
Move steam mop back and
forwards across the oor,
getting into corners and
awkward places
For steam burst from front nozzle set to steam
only select wood or carpet. Press the steam burst
button to activate, squeeze the trigger to release
steam. Press the steam burst button to turn o
Using accessories
Place the pet pad on the
oor white side facing up.
Place steam mop onto pad
making sure the entire pad
covers the oor head.
Applying the pet pad
To produce steam, squeeze
the trigger. To prevent over
wetting oors avoid holding
the trigger continuously
Move the steam mop slowly
backwards and forwards across
the carpet paying particular
attention to high trac areas
To remove carpet glider
push down on clip and
lift steam mop
Refreshing carpets
WARNING: Always turn OFF the steam mop when
changing accessories and steam pads.
To Next Page
Loading...
