EasyManuals Logo
Home>Vax>Vacuum Cleaner>VX23 Series

Vax VX23 Series User Manual

Vax VX23 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Using your machine
Twist the detergent cap
anti-clockwise and lift
to remove
Before replacing the twin
tank make sure the hard
water lter is in place
Align the twin tank and push
until it clicks into place
Pour 50ml of Vax
detergent and 250ml of
water into the detergent
tank then replace cap and
twist clockwise to tighten
IMPORTANT:
If you do not want to use detergent on your ooring, select carpet or wood on the surface selector.
Always test on an inconspicuous area of ooring rst before using detergent.
Filling twin tank
Before you begin cleaningBefore you begin cleaning
The steam mop and accessories get very hot during use, always allow them to cool down before handling.
Always unplug and switch o the steam mop when assembling and lling water and solution tank.
Always switch o the steam mop before emptying the water tank or changing the cleaning pads/accessories.
IMPORTANT: Please refer to oor manufacturer’s care recommendations before use and test the steam mop
on a discrete area of ooring to begin with.
When using the steam mop, basic safety precautions should always be observed.
Don’t aim the steam mop at people, animals, plants and electrical components such as interior of ovens or wires. Never touch the
steam burst or oor head from a short distance. (There is a risk of scalding)
The steam mop is equipped with a thermostat and a thermal cut-out. If for any reason the steam mop overheats it
will switch o. If this happens turn o and unplug the steam mop, allow to cool for a least 2 to 4 hours and re-start.
Plug into mains and slide
switch to on position. The red
light will illuminate to show
power on. The blue light will
illuminate to show the steam
mop is ready to use
To use with detergent select
desired setting for the area
you want to clean. These
settings are tile or vinyl
min
max
D
E
T
E
R
G
E
N
T
o
min
D
E
T
E
R
G
E
N
T
m
a
x
To recline the steam mop
place your foot onto the
oor head and pull
handle backwards
To steam your oors
without solution select
carpet or wood setting
Using your machine

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax VX23 Series and is the answer not in the manual?

Vax VX23 Series Specifications

General IconGeneral
BrandVax
ModelVX23 Series
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals