Remove the hose from
the standard hose outlet
used for cleaning modes
and place it on the blower
outlet located at the back of
the machine. Remove oor
tool and connect the crevice
nozzle to hose.
Connect the vacuum
cleaner to the power supply
and switch ON
by pushing the on/o
switch “I”.
WARNING: Keep bystanders clear from blowing debris (including persons and animals)
WARNING: Wear a dust mask and protective eye wear when using blower function .
IMPORTANT: Make sure the tank container is empty before using the blower.
SETUP the Blower Function
Keep bystanders clear from blowing debris (including persons and animals)
Wear a dust mask and protective eye wear when using blower function .
Make sure the tank container is empty before using the blower.
Using your machine
To Next Page
Loading...
