Some vehicle roofs limit the potential separation value. In this case a roof mount (RLACS171) can be utilised to
increase separation.
Antennas should be positioned so that the gold antenna connector of primary and secondary antennas (A+B)
are pointing in the same direction. This matching positioning ensures that the separation measurement is relative.
We recommend you measure separation from outer edge of antenna connector A, to same outer edge of antenna
connector B. Note that accurate entry of antenna separation is essential for dual antenna operation.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_3i_Range/VBOX_3i_User_Guide_(All_Variants)/02_-
_VB3i_GNSS_Antenna_Placement
11
To Next Page
Loading...