Need help?Do you have a question about the VDG TM100B25 and is the answer not in the manual?
Details on mounting the drum motor horizontally, square to the conveyor frame, and parallel to the idler pulley.
Guidance on proper electrical connection, referencing diagrams, qualified personnel, and overload protection.
Essential checks before operating the drum motor, including correct voltage and unobstructed rotation.
Warnings against overtightening set screws and ensuring sprocket alignment with belt pockets.
Step-by-step instructions for correctly connecting a drum motor equipped with a backstop (TB) device.
Instructions on how to release the backstop feature on a drum motor.
Instructions on how to re-engage the backstop feature on a drum motor.
Detailed steps for safely changing the oil in a drum motor, including cooling and draining.
Lists specific oil types suitable for food-grade applications.
Lists specific oil types recommended for clutch brake applications.
A comprehensive table detailing drum motor oil content in litres based on face width and motor type.
Common causes and checks for a drum motor failing to start or operate.
Troubleshooting steps for identifying and resolving issues causing the drum motor to overheat.
Solutions for drum motors that hum, start very slowly, or do not start at all.
Guidance on diagnosing and rectifying problems that cause overload or fuse tripping.
Steps to identify and resolve causes of excessive noise from the drum motor.
To Next Page
General