Need help?Do you have a question about the VDigi 32E300CT and is the answer not in the manual?
General| Screen Size | 32 inches |
|---|---|
| Aspect Ratio | 16:9 |
| Display Technology | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Built-in Speaker | Yes |
| Display Resolution | 1366 x 768 pixels |
Instructions for installing and using the TV to avoid fire, electric shock, or damage.
TV placement near an accessible AC power outlet on a stable, level surface.
Disconnect all cables before moving the TV; use two or more people for large TVs.
Do not cover ventilation holes or insert objects; ensure space around the TV for proper airflow.
Handle the AC power cord and outlet carefully to avoid risks of fire, shock, or damage.
Do not use the supplied AC power cord on other equipment or modify it.
Avoid using the TV in specific locations, environments, or situations to prevent malfunction.
Do not throw objects at the TV; avoid touching cracked screens until unplugged.
Disconnect the TV from the AC power for environmental and safety reasons when not in use.
Do not allow children to climb on the TV set and keep small accessories out of their reach.
Turn off TV and unplug immediately if AC cord is damaged or TV is damaged.
View the TV in moderate light to avoid eye strain during long viewing periods.
Black dots or bright points on the screen are structural properties and not malfunctions.
Unplug the AC power cord before cleaning; use a soft cloth and mild detergent.
Keep optional equipment emitting electromagnetic radiation away from the TV to avoid distortion.
Place TV face down on a soft cloth or cushion to prevent panel damage.
Insert stand support pillar and fasten with three screws as indicated.
Align stand screw holes with TV and tighten the screws.
POWER to standby/on; NUMERIC KEY for direct channel access.
TV MENU to display menu; CURSOR to move within menus.
CH.LIST to display channels; VOL+/- to adjust sound level.
PIC to switch picture mode; SLEEP to set TV turn-off timer.
FREEZE to freeze picture; EPG for Electronic Program Guide.
FAV for favorite channels; DTV to select digital TV source input.
PVR.LIST to show recording list; MUTE to disable/enable sound.
AUDIO to select audio output; RECALL to access previously viewed channel.
SOURCE to select input source; OK to confirm selection.
EXIT to exit menu; SOUND to switch sound mode.
CH+/CH- to access channels; ASPECT to adjust image display proportion.
USB to select source input; TEXT keys for teletext switching.
INFO for program details; SUBTITLE to switch subtitles.
REC/REP for recording; other keys for multimedia functions.
Description of INPUT, MENU, CH +/-, VOL +/-, and POWER buttons on the TV panel.
Indicator light shows red in standby mode and blue when TV is on.
Receives IR signals; ensure no obstruction over the sensor.
Reserve for external USB device.
HDMI input terminals for connecting digital audio and video sources.
VGA video and audio input terminals for computer connection.
YPbPr terminals for component video and audio input.
AV terminals for composite video and audio input.
RF IN for antenna connection; AC for power input.
PC AUDIO input and MONITOR output terminals.
Appears on first power-on or factory reset; start auto tuning.
Access channel menu for ATV/DTV; includes Auto Tuning, DTV Quick Tuning, and Manual Tuning.
Allows deleting, renaming, skipping, or assigning programs as favorites.
Adjust picture effects like contrast, brightness, color temperature, and sharpness.
Adjust sound effects, balance, auto volume, and surround sound modes.
Adjust power on/off times, sleep timer, and auto sleep settings.
Adjust menu language, audio language, and subtitle language (DTV only).
Lock system, set password, block programs, and set parental guidance.
Access Digital Media Player (DMP) and USB device content like photos, music, video.
EPG menu displays broadcast information on DTV channels.
Use keys to select programs; INFO displays program details.
View reminder schedule; set reminders for programs.
Access MHEG-5 data broadcast in Hong Kong via TEXT button.
In DTV mode, press EPG to show program list within 7 days.
Use ▲▼ to select program, press REC to enter recording page.
Press yellow button in recording page to view the task list.
Press ENTER in recording page to add a new task to the list.
Enter PVR File System, check system, and note speed requirements for HD support.
Recordings are playable only on the same TV; formatting erases all device data.
Choose the disk to save record files.
Verify if the PVR File System is set up correctly on the USB device.
Format the device to Hi Speed FS for optimal PVR performance.
Format the disk; warning that all data will be lost.
Select channel and click 'record' to start recording a DTV program.
Recorded programs are saved in the '_MSTPVR' folder on the USB device.
Pause and record digital programs to USB storage; requires USB 2.0 formatting.
Format USB device to allocate space for Time Shift function.
Record paused DTV programs to USB storage via the USB port.
Resolution and vertical frequency for YPbPr and HDMI inputs.
Resolution and vertical frequency for VGA inputs.
Product model number is 32E300CT, with a 32-inch panel size.
Screen resolution is 1366x768; viewing angles are H:170°, V:160°.
Brightness is 300 cd/m²; contrast ratio is 1500:1.
Response time is 6.5ms; TV system is DMB-TH/PAL.
Audio system is BG/DK/I; power input is AC 100-240V/50-60Hz.
Power consumption is less than 75W.
List of available input terminals including Tuner, HDMI, VGA, AV, and USB.
MONITOR VIDEO and MONITOR AUDIO output terminals.
User manual, remote controller, batteries, and warranty card are included.
Check antenna/cable connection; connect to AC power; press Power button if indicator is red.
Check antenna/cable connection, location, direction, and condition.
Check antenna/cable connection, condition, and service life.
Check antenna/cable connections and keep away from other cables.
Check antenna/cable connection and keep cables separate.
Small black or bright pixels are normal and do not indicate a malfunction.
Check input port connections and ensure ports are firmly seated.
Turn on equipment, check cable, select correct input source.
Press Vol +/- or Mute key; check audio cable L/R connection.
Switch between digital/analog modes and select desired channel.
Channel may be for scrambled/subscription service or data only.
Contact a local installer to verify digital transmission availability.
Check if the 'Sleep off' function is activated.
Replace the batteries in the remote control.
Ensure your equipment is compatible with HDMI control.
Contact the related cable broadcaster for reception issues.
Light/dark dots under 7 are normal and acceptable.
To Next Page
