58 / 58
b) Check whether the antenna is connected correctly and firmly to
Antenna In port of the receiver.
c) Check whether the antenna cable to VD
i-S is too long.
d) Change an antenna cable with better quality.
e) Check with building service agent if needed
v) Remote Control does not work:
a) Check whether batteries are mounted correctly.
b) Change the exhausted batteries.
c) USE RCU within workable distance (7 meters)
d) Remove the hinder between RCU and the receiver.
Note: If the problem remains or if you have problem not listed above, please
contact V Digi(28611109) or your sell agent for help.
To Next Page