SMART mode
☞
Press the SMART button on the remote
control to activate SMART mode.
:
The TFT screen now always displays the
picture from the DVD player, regardless
of the AV source set using the MODE
button.
:
Using the MODE button, you can now
select which of the AV inputs AV1 or
AV2 is switched to the AV output.
Notes:
SMART mode can only be activated when a
disc has been inserted.
SMART mode is automatically deactivated
when the unit is switched off.
Display settings
☞
Press the SEL button once or several
times to call up the TFT display settings.
☞
Press the VOL- or VOL+ buttons to
change the value of the selected setting.
☞
Press the ENTER button to store the set
value and exit the display settings.
■ Brightness - “BRIGHTNESS”
☞
Set the brightness to between 0 and 32.
■ Colour saturation - “COLOR”
(AV1/AV2 only)
☞
Set the colour saturation to between 0
and 32.
■
Contrast - “CONTRAST”
☞
Set the contrast to between 0 and 32.
■
Colour balance - “TINT”
(AV1/AV2 only)
☞
Set the colour balance to between 0
and 32.
■
Image sharpness - “SHARPNESS”
(AV1/AV2 only)
☞
Set the sharpness to between 0 and 32.
■
TV standard - “TV TYPE”
☞
Set the TV standard appropriate to the
connected AV source. The options are
“AUTO”, “PAL” and “NTSC”.
■
Display mode - “DISPLAY MODE”
☞
Set the TFT display mode in accordance
with the current video medium. You can
choose between “NORMAL” (4:3),
“FULL” (16:9) und “WIDE1” (extended
16:9).
■
Installation position - “MOUNTING”
☞
Set the installation position to
“CEILING” (overhead).
Note: The “DESKTOP” setting is not
supported by drive of the DVD player.
■
User settings - “USER”
This function allows the display settings,
brightness, contrast, colour, tint and
sharpness to be saved specifically for a
certain user and then subsequently restored.
☞
Set the desired values for the display
settings.
☞
Select “SAVE” by pressing the VOL+
button to save the values as user
settings.
☞
Select “READ” by pressing the VOL-
button to restore the user settings.
* for AV 1 and AV 2 only
■
Default settings - “DEFAULT”
☞
Select “DEFAULT” and press the VOL+
button to reset the display settings to
their default values.
21
English
BASIC OPERATION
To Next Page
Loading...
