VDO DOM 6500 - Settings; Speaker, Audio, and Preferences Setup

Speaker setup menu
■
DOWNMIX
This is to select the Dolby AC3 5.1 Downmix
mode for the analog output.
☞
If you select LT/RT, the Dolby Digital
signal is converted to a Dolby Surround
signal.
☞
If you select STEREO, only left and right
channels are decoded.
Audio setup menu
■
OP MODE
The operating mode for the Dolby Digital
decoder cannot be configured. The mode is
always set to LINE MODE.
■
DUAL MONO
☞
Select the desired Dual mono mode for
1+1 coded Dolby Digital programs.
❏
STEREO: Stereo-reproduction 1+1
program. CH1 for left channel, CH2 for
right channel.
❏ CH1 MONO: CH1 Mono-reproduction.
CH1 channel in both Left/Right output.
❏ CH2 MONO: CH2 Mono-reproduction.
CH2 channel in both Left/Right output.
❏ MIX MONO: Mix mono-reproduction.
CH1+CH2 in both Left/Right output.
■ LPCM OUTPUT
☞
Select the sampling rate for the D/A
converter between 48 kHz and 96 kHz.
■
DRC - Dynamic range Control
☞
Select DRC and adjust the dynamic
range of a Dolby Digital encoded
program. There are 8 steps between full
compression and off compression.
Preferences setup menu
■
AUDIO
☞
Select the preferred initial audio
soundtrack language from the list.
■
SUBTITLE
☞
Select the preferred initial subtitle
language from the list.
■
DISC MENU
☞
Select the preferred initial disc menu
language from the list.
■
LOCAL
☞
Select the region in which the
multimedia system is to be operated
(e.g. GREAT BRITAIN).
This setting affects the parental control
function (parental guidance level for
films).
■
PARENTAL
☞
Select the desired parental guidance
level from the list.
The factory default password for
changing the parental guidance is 3308.
■ PASSWORD
☞
Select CHANGE to change the factory
set password for parental control.
The initial factory code is 3308.
☞
Type in the old password. Then key in a
new 4 digit password. Confirm the new
password by retyping it.
■
SMART NAV
This is to set the display mode for MP3
playback.
☞
Select NO MENU to play MP3 files
without folder / file display.
☞
Select WITH MENU to show the disc
contents in folder / file style.
■
DEFAULTS
☞
Select RESET to set the player to the
factory defaults.
28
SETTINGS