To Next Page
C
Christina SavageSep 7, 2025
Why is there distorted sound or skipping during CD play on my VDO MS 4150 RS Car Receiver?
- TTaylor McguireSep 7, 2025
The CD may be damaged or soiled.
Why is there distorted sound or skipping during CD play on my VDO MS 4150 RS Car Receiver?
The CD may be damaged or soiled.
Why is my telephone not being detected even though it has been connected to my VDO Car Receiver?
Call up the initialization menu, select “Telephone ON” and select “12 V” for Nokia hands-free units.
What does it mean when my VDO Car Receiver displays 'Stand-by' as the only selectable option from the main menu?
Wait for several seconds until the navigation computer is operational; options will be displayed in normal font.
How to ensure the GPS antenna is working properly on my VDO MS 4150 RS Car Receiver?
Ensure that the GPS antenna is not being obstructed by any objects. If you are in a garage, car park, or tunnel, move the vehicle outdoors.
What to do if my VDO MS 4150 RS Car Receiver has poor radio reception?
Check that the antenna is fully extended and correctly connected. Also, verify that the negative pole (brown lead) of the supply power is correctly connected to the vehicle chassis.
Why are no more directions given shortly after crossing the border on my VDO Car Receiver?
You are traveling in a country for which you do not have activated C-IQ map contents. Contact C-IQ Service to activate map data for the required country.
What to do if my VDO Car Receiver navigation radio is not functioning and there is no display?
Check the fuse (unit and vehicle) and the connections (refer to the installation instructions).
Why does my VDO Car Receiver display the frequency instead of the station name?
The unit is set to a station that does not transmit RDS signals, or the transmitter is too weak.
What to do if my VDO MS 4150 RS Car Receiver is not functioning or is not suitable for VW/Audi vehicles?
The power supply connector pin assignment for VW and Audi is not the same. Use the VDO Dayton MA1910 adapter for the connection.
How to activate traffic announcements on my VDO Car Receiver?
Activate the “TA Scan” function in the “Information” menu.
General| Brand | VDO |
|---|---|
| Model | MS 4150 RS |
| Category | Car Receiver |
| Language | English |
