Inserting/changing SD cards
■
Inserting the card
☞
Insert the card into the SD card slot with the label facing up and the slanted corner
on the right.
☞
Press the card into the slot until it engages.
■
Removing the card
☞
Carefully press the centre of the card.
:
The SD card is released.
☞
Pull the card straight back to remove it from the SD card slot.
■
Information on SD memory cards
Only insert SD memory cards in the SD card slots. Inserting other card types can result
in malfunction or destruction of the unit and the card.
Only use SD memory cards from well-known manufacturers. The use of other cards
may result in malfunctions.
Do not use miniSD™ cards with adapters. The miniSD™ card could become detached
from the adapter when removing it from the card slot. The adapter could then get
stuck in the device.
SD is a trademark of the Toshiba Corporation.
The SD logo is a registered trademark.
Menu operation
The important controls for menu
operation are the cursor buttons 4, 6,
8 and 2 as well as the OK button.
☞
Press the cursor buttons to move
the cursor (coloured mark) to the
desired menu option.
☞
Press the OK button to confirm the
selection and activate the function.
☞
Press the OK button to adopt the
settings.
☞
Press the ESC button to quit a
menu without adopting the set
value or to jump back one menu level.
✎
All the available options are highlighted in colour.
✎
Unavailable options are skipped automatically.
Operation
9
To Next Page
Loading...
Need help?
General
