Showing tour
With this function it is possible to view the list of tour stages (intermediate
destinations) for the selected tour.
☞
Select “Show list”.
:
The list of intermediate destinations for the selected tour is displayed.
☞
If you select one of the tour stages from the list, the details of the address are
displayed.
Editing tour
☞
Select the desired tour from the Tours menu.
☞
Select “Edit tour”.
The “Edit tour” menu offers the following options:
❑
Add destination: Here you can add new destinations to the tour.
❑
Rearrange: Here you can move stages within the selected tour.
❑
Save as: Here you can save the selected tour under a name of your choice.
❑
Delete: Here you can delete individual stages of the selected tour or the entire tour.
■
Adding tour stages
☞
In the “Edit tour” menu select the option “Add destination”.
☞
Enter a new destination or select a destination from the address book.
☞
Select “OK” to add the selected destination to the tour.
:
The list of stages already stored for the tour is displayed.
☞
Then move the cursor to the position in the list in front of which the new stage is to
be inserted.
☞
Press the OK button to position the new stage in front of the highlighted entry.
☞
Select “add to the end…” if the new stage is to be placed at the end of the list.
■ Moving tour stages
☞
In the “Edit tour” menu select the option “Rearrange”.
:
The list of tour stages in the selected tour is displayed.
☞
Highlight the stage to be moved using the cursor.
☞
Press OK.
☞
Then move the cursor to the position in the list in front of which the stage to be
moved is to be inserted.
☞
Press the OK button again to place the stage at the selected position.
☞
Select “add to the end…” if the stage is to be moved to the end of the list.
Navigation
18
To Next Page
Loading...
Need help?
General
