Vdwall LVP615 - Page 16

16. setting signal hot spare
16.1. after entering input video signal setup menu, press Brt- or Brt+ key to select
hot spare setup option, rotate OK to On or Off every group hot spare, press
OK to save ( for example you have connected input source HDMI and DVI to
LVP615, at present is DVI source output if some problem happens the DVI
source lost LVP615 will automatically switch video source to HDMI);
17. Input channel V2 / YPbPR configuration
17.1. after entering input video signal setup menu, press Brt- or Brt+ key to select
setup option 2.5 V2 or YPbPR, rotate OK to select input channel ( for
example we configure it to V2 it means V2 / YPbPR input port V2 will be
available );
2. Input Video Signal
--------------------------------------------------------------------
2.1 DVI EDID 1920 X 896_60
2.2 V1 / V2 Backup Off
2.3 VGA1 / VGA2 Backup Off
2.4 HDMI / DVI Backup Off
2.5 V2 or YPbPr V2
2.6 Switch Mode One Key Sw.