Vdwall LVP615 - Page 17

18. Preselect input quick switch
18.1. after entering input video signal setup menu, press Brt- or Brt+ key to select
setup option 2.6 Switch Mode, rotate OK to select Pre. +Take SW then press
OK to open preselect input quick switch function ( after opening the
function preselect a input source LVP615 can achieve quick switch between
present output video and preselect video, after preselecting video source
press Auto / Take key to switch signal source);
2. Input Video Signal
--------------------------------------------------------------------
2.1 DVI EDID 1920 X 896_60
2.2 V1 / V2 Backup Off
2.3 VGA1 / VGA2 Backup Off
2.4 HDMI / DVI Backup Off
2.5 V2 or YPbPr V2
2.6 Switch Mode One Key Sw.
2. Input Video Signal
--------------------------------------------------------------------
2.1 DVI EDID 1920 X 896_60
2.2 V1 / V2 Backup Off
2.3 VGA1 / VGA2 Backup Off
2.4 HDMI / DVI Backup Off
2.5 V2 or YPbPr V2
2.6 Switch Mode One Key Sw.