Normal or sharp，default : normal.
According to “8.5 brightness level” setting,
adjustment range includes 0-64 or 0-100.
The factory default of adjustment range is
0-64 and default is 64.“Brightness level” can
be set in factory setting.
Note
：
1). To make sure of full gray scale of output image, these
output parameters are set as default.
2).Color parameters are invalid for RGB format DP, DVI and
HDMI. VGA is RGB format. So setting is not available.
6.5 audio setting
5.Audio
--------------------------------------
5.1 AD1 Config V1
5.2 AD2 Config V2
LVP615U supports 4 channels of stereo audio input signals. Three
of them are HDMI and DP audio. The other two AD1 and AD2 are
external input. Audio input signals for AD1 and AD 2 can be configured
to match the video input signals correspondingly and switching
between AD1 and AD2 is synchronous to that between the video
inputs.
Operation way
：
Press ↓ button to select 5.1 AD1 config or 5.2 AD2 config menu，
Rotate knob to select corresponding input signals and press OK to
To Next Page
Loading...
