Vdwall LVP615U - Page 77

LVP615U 使用说明
77
Show as the picture
Screen output parameters include these parts as below:
(1) Image input/output parameters configuration and mosaic mode setup
The parameters of output windows should be configured to the actual pixels of the screen
to be driven.
Mosaic mode setup and input image parameters configuration apply to multi-machine
parallel mosaic only. The mosaic options are provided to set whether the processor adopts
synchronous or non-synchronous mosaic mode. Input image parameters are used to set
the location and size of the images to be captured from input image based on the actual
size of the screen.
Caution: input image parameters shall not be configured unless the following conditions
are met:
a. The input signal of the processor is DVI
b. The resolution of DVI input signals is the same with output
resolution of the processor.
c. The processor is in mosaic state(the mosaic indicator illuminates
normally).