Need help?Do you have a question about the Vector Welding AC/DC TIG 200P and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Output Current Range (TIG) | 10-200A |
| Output Current Range (MMA) | 10-160A |
| Duty Cycle | 60% @ 200A |
| Duty Cycle (TIG) | 60% @ 200A |
| Duty Cycle (MMA) | 60% @ 160A |
| Protection Class | IP21S |
| Insulation Class | F |
| Postflow Time | 0-10s |
| Rated Output Current (TIG) | 200A |
| Open Circuit Voltage | 56V |
| Efficiency | 85% |
| Welding Process | TIG, MMA |
| Arc Starting | HF |
| Rated Output Current (MMA) | 160A |
| Input Voltage | 230V ± 15% |
To Next Page
