What to do if my Vector Welding System has no welding output but the power indicator is lit and the fan is working?
If your Vector Welding System turns on, the power indicator is lit, and the fan is running, but there's no welding output, the control board may be broken, so you should replace it. Another possible cause is damage to the first inverter circuit, which would also require replacement.
Why is my Vector Welding System not turning on, with neither the fan nor the power indicator lighting up?
If your Vector Welding System doesn't turn on, and neither the fan nor the power indicator light up, it could be due to several reasons. First, ensure the power cable is correctly connected; if not, connect it properly. The power cable itself might be broken, requiring repair or replacement. Also, the power switch could be damaged, necessitating its replacement. Another possibility is that the power indicator light is broken, or there are other problems. Finally, the power board might be broken, requiring replacement.
What to do if the fan is not working when I turn on my Vector Welding System, but the power indicator is lit?
If the power indicator is lit, but the fan isn't working on your Vector Welding System, the fan may be broken and needs to be changed. There could also be something obstructing the fan, so try cleaning it. Another possibility is that the start capacitor of the fan is damaged, requiring a replacement.
What to do if the power indicator is not lit but the fan is working on my Vector Welding System?
If the fan is working, but the power indicator is not lit on your Vector Welding System, the power light may be damaged, or the connection may not be good, so you should replace the power light. Alternatively, the power board or the display panel could be broken, requiring replacement.
General| Brand | Vector Welding |
|---|---|
| Model | ARC Series |
| Category | Welding System |
| Language | English |
To Next Page