Vector Welding MIG 185 - Page 2

Inhalt
Hinweisezur Verwendungdieser Bedienungsanleitung
1.1 Arc welding damage--------------------------------------------------------------44-41
1.2 Effects of low frequency electric and magnetic fields----------------------- 47-47
1.3 Symbol chart------------------------------------------------------------------------ 48-48
1. Safety instructions
2.Summary
2.1 Brief introduction--------------------------------------------------------------------49-49
2.2 Working principle--------------------------------------------------------------------49-49
2.3 Specifications------------------------------------------------------------------------50-54
2.5 Packaged Items---------------------------------------------------------------------- 56-56
2.4 Duty cycle-----------------------------------------------------------------------------55-56
English version 41-79
Brand description---------------------------------------------------------------------42-42
Read the preface------------------------------------------------------------------------43-44
1.1 Gefahren des Lichtbogenschweißens-----------------------------------------04-08
1.2 Effekte von Niederfrequenzelektrik und magnetischen Feldern---------- 08-08
1.3 Tabelle der verwendeten Symbole---------------------------------------------- 09-09
1. Sicherheitshinweise
2. Zusammenfassung
2.3 Spezifikationen------------------------------------------------------------------- 11-15
2.1 Kurze Zusammenfassung---------------------------------------------------------- 10-10
2.2 Funktionsprinzip---------------------------------------------------------------------- 10-10
2.4 Arbeitszyklus------------------------------------------------------------------------- 16-17
2.5 ------------------------------------------------------------17-17Mitgelieferte Einzelteile
Deutscher Teil 01-40
Markenbeschreibung----------------------------------------------------------------02-02
Lesen Sie das Vorwort---------------------------------------------------------------03-04
5. Fehlerbehebung
5.1 Grundlegende Fehlerbehebung--------------------------------------------------- 37-39
6. Instandhaltung
6.1 Instandhaltung----------------------------------------------------------------------- 39-40
4. Schweißverfahren
4.1 MIG (GMAW / FCAW) Grundlegende Schweißverfahren---------------------- 34-36
3. Inbetriebnahme
3.1 Layout für die Steuertafel------------------------------------------------------------ 18-21
3.2 Installation Drahtspule------------------------------------------------------------- 22-22
3.3 Einsetzen des Drahtes in die Vorschubeinrichtung------------------------------ 23-24
3.4 Einstellung der Spannung der Einzugswalze------------------------------------- 24-24
3.5 Wechseln der Einzugswalze-------------------------------------------------------- 25-25
3.6 Schutzgasregler Bedienungsanleitung-------------------------------------------- 26-29
3.7 Installation MIG (GMAW) Schweißen mit gasgeschirmtem MIG-Draht------ 29-30
3.8 Installation für MIG (FCAW) Schweißen mit gaslosem MIG-Draht------------- 30-31
3.9 Konfiguration für LIFT TIG (GTAW) Schweißen---------------------------------- 32-33
3.10 Konfiguration für STICK Metall-Lichtbogenschweißen------------------------ 33-34
Zertifikat------------------------------------------------------------------------------------ 80-80
3. Operation
3.6 Shielding gas regulator operating instructions---------------------------------- 65-68
3.1 Layout for the panel----------------------------------------------------------------- 57-60
3.2 Installing spool----------------------------------------------------------------------- 61-61
3.7 Set-up MIG (GMAW) welding with gas shielded MIG wire-------------------- 68-69
3.3 Inserting wire into the feed mechanism------------------------------------------ 62-63
3.9 Set-up for MIG (FCAW) welding with gas less MIG wire---------------------- 69-70
3.4 Feed roller pressure adjustment--------------------------------------------------- 63-63
3.9 Set-up for LIFT TIG (GTAW) welding---------------------------------------------- 71-71
3.5 Changing the feed roll--------------------------------------------------------------- 64-64
3.10 Set-up for STICK metal arcw wlding (MMA)------------------------------------ 72-72
5. Troubleshooting
5.1 Troubleshooting----------------------------------------------------------------------76-78
6. Maintenance
6.1 Maintenance------------------------------------------------------------------------- 79-79
4. Welding technique
4.1 MIG (GMAW/FCAW) basic Welding technique--------------------------------- 73-75
Certificate---------------------------------------------------------------------------------80-80