Need help?Do you have a question about the Vector Lil' Beaver 2.0 and is the answer not in the manual?
General| Brand | Vector |
|---|---|
| Model | Lil' Beaver 2.0 |
| Category | Media Converter |
| Language | English |
General safety and operational guidelines for the ultrasonic scaler, including heat sources and handling.
Specific precautions for using the ultrasonic scaler during prophylaxis, focusing on insert wear and patient safety.
Describes the purpose and operation of the Little Beaver 2.0 Ultrasonic Scaler in dental prophylaxis.
Details the standards and directives the Little Beaver 2.0 Ultrasonic Scaler complies with for safety and quality.
Information on ordering supplies and replacement parts for the ultrasonic scaler and where to get service.
Lists the dental procedures for which the ultrasonic scaler is applicable, including scaling and debridement.
Specifies the voltage, current, and wattage requirements for the multi-voltage ultrasonic scaler unit.
Provides the physical dimensions (height, width, depth) and weight of the ultrasonic scaler unit.
Details the recommended ambient temperature, humidity, and atmospheric pressure for operating the scaler.
Outlines the environmental conditions for transporting and storing the ultrasonic scaler to prevent damage.
Lists conditions or situations where the ultrasonic scaler should not be used, such as with pacemakers.
Provides important warnings for users, especially regarding pacemakers and continuous water flow.
Guidelines for personal protection, cleaning, and sterilization to ensure infection control during use.
Recommendations for dental water supply systems to comply with CDC and ADA standards for infection control.
Details water pressure, shut-off valves, filter recommendations, and connection steps for the water supply.
Covers electrical requirements and the process of connecting the AC power cord to the unit.
Instructions for unpacking the scaler, verifying components, and positioning the unit for use.
Details controls and indicators on the rear and front panels of the ultrasonic scaler unit.
Explains water flow adjustment, intensity control, and the function of the handpiece.
Instructions on how to install and use the handpiece holder, especially for left-handed users.
Details on assembling and dismantling the handpiece sleeve for cleaning and autoclaving.
Explains the two-position momentary switch of the foot pedal and its functions during operation.
Guidance on optimal patient positioning for access, comfort, and visibility during scaling procedures.
Step-by-step instructions for performing scaling, including insert seating, water flow, and technique.
Advice on managing patient sensitivity, including pressure, motion, and power settings.
Procedures for daily maintenance to minimize biofilm and ensure optimal scaler performance.
Steps to follow for starting up the ultrasonic scaler at the beginning of each day for proper operation.
Cleaning and sterilization procedures for the handpiece and sleeve between patient treatments.
Instructions for shutting down the ultrasonic scaler at the end of the day, including cleaning.
Provides basic troubleshooting steps for common issues like the system not operating or no water flow.
Details the one-year warranty against defects in material and workmanship for the ultrasonic scaler.
Specifies that repairs must be carried out by authorized personnel to maintain warranty validity.
Lists conditions under which the warranty may be voided, such as natural disasters or improper use.
To Next Page