Vector TRA-F22 A Series - Page 5

TRA-F22x-A
TECHNICAL SPECIFICATIONS
Doc: 70-00-0958A V1.0, 20221102 © Vector Controls GmbH, Switzerland Page 5-34
Subject to change without notice www.vectorcontrols.com
VECTOR
2.2 Dimensions, mm (inch)
For flush mounting, a 75 x 75 x 35 mm (3.0 x 3.0 x 1,4 inch) installation box or larger must be used.
See Ordering for recommended installation boxes (chapter 1.3, page 3).
2.3 Connection diagram
For details see the TRA-F22x-A installation sheet no. 70-000957 (www.vectorcontrols.com).
The wiring for the different predefined TRA-F22x-A applications can be found in chapter 5.6.3, page 19.
A typical connection of the TRA-F22x-A is shown below:
61(2.4)
16(0.6) 25(1.0)
88(3.5)
88(3.5)