Vector VEC1086 A - User Manual

SMART AUTOMATIC
BATTERY CHARGER
12 VOLT 2/4/6 AMP CHARGE RATES
OWNER’S MANUAL & WARRANTY INFORMATION
• IMPORTANT SAFETY INSTRUCTIONS •
WARNING – RISK OF EXPLOSIVE GASES
1.
WORKING IN VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS.
BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY
OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT EACH
TIME BEFORE USING YOUR CHARGER, YOU READ THIS MANUAL AND
FOLLOW THE INSTRUCTIONS EXACTLY.
2. To reduce risk of battery explosion, follow these instructions and those published by the battery
manufacturer and manufacturer of any equipment you intend to use in vicinity of battery. Review
cautionary markings on these products and on engine.
GENERAL BATTERY SAFETY
1. Use this charger for charging a LEAD-ACID battery only. It is not intended to supply power to a low voltage
electrical system other than in automotive applications. Do not use this battery charger for other types of batteries,
these may burst and cause injury to persons and damage to property.
2. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire,
electric shock, or injury to persons.
3. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
4. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result
in a risk of fire and electric shock.
If extension cord must be used, make sure:
a. That pins on plug of extension cord are the same number, size, and shape as those of plug on charger.
b. That extension cord is properly wired and in good electrical condition; and
c. That wire size is AWG #16 (16 gauge) to 100 feet and AWG #14 for distances over 100 feet.
5. Do not operate charger with damaged cord or plug - replace immediately.
6. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take
it to a qualified service technician.
7. Do not disassemble charger; take it to a qualified service technician when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
8. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning
off controls will not reduce this risk.
9. Do not expose charger to rain, snow or use when wet.
10 . Never charge a frozen battery.
SAVE THESE INSTRUCTIONS:
This manual contains important safety and operating instructions for battery charger Model VEC1086 A
4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312 • TEL: 954-584-4446 • FAX: 954-584-5556 • TOLL-FREE 866-584-5504
VEC1086 A
California Proposition 65:
WARNING:
THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER OR REPRODUCTIVE TOXICITY
.
This device complies with Part 15 of the FCC Rules.

Vector VEC1086 A Specifications

General

Brand	Vector
Model	VEC1086 A
Category	Battery Charger
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

Explosive Gases Warning

Crucial warning about explosive gases from lead-acid batteries during normal operation.

General Battery Safety Guidelines

Key safety rules for handling lead-acid batteries and chargers to prevent hazards.

Personal Safety Precautions

AC Power Cord Connection Safety

Ensuring safe AC power cord connection to a polarized outlet to prevent electrical shock hazards.

Preparing for Battery Charging

Charger Placement and Ventilation

Recommendations for safe charger positioning and adequate ventilation during charging operations.

DC Connection Safety Procedures

Critical steps for connecting and disconnecting charger clamps to prevent sparks and battery explosion.

Introduction and Product Features

Key Charger Features Overview

Details the charger's capabilities, including charge rates, microprocessor control, and technology.

Controls and Indicators Explained

Charger Operation Guide

Instructions on how to operate the charger, select rates, and interpret LED status lights.

Charging Battery When Installed in Vehicle

Charging Battery When Outside Vehicle

Estimated Battery Charging Times

Provides charts and methods to estimate the duration required for a full battery charge.

Charger Care and Maintenance

Guidance on maintaining the charger's clamps, cord, and exterior for optimal performance and longevity.

Troubleshooting Fault LED Status

Common Fault LED Indicators

Lists conditions that activate the FAULT LED, such as poor connections or battery issues.

Resolving Charging Issues

Addresses problems like batteries not accepting a charge or slow charging rates.

Cold Battery Charging Protocol

Procedures for charging very cold batteries and warnings against charging frozen ones.

Appendix A: Charging Time Calculations

Vector 5-Year Limited Warranty Program

Warranty Return and Repair Process

Details the procedure for returning products for warranty service, including shipping and repair timelines.

Warranty Coverage Limitations

Outlines exclusions from warranty coverage, such as accidental damage or misuse.