EasyManua.ls Logo

Veeco MS40 - Page 142

Veeco MS40
169 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vacuum Instrument Corp.
2099 Ninth Avenue
Ronkonkoma, NY 11779
631.737.0900
Vacuum Instrument Corp.
2099 Ninth Avenue
Ronkonkoma, NY 11779
631.737.0900
19 - Standby
20 - Roughing Sniffer Probe
21 - Sniffer Mode Leak Testing
{ States 22 - 25 are for Sniffer Mode, Manual-Ranging}
22 - Standby
23 - Standby
24 - Roughing Sniffer Probe
25 - Sniffer Mode Leak Testing
26 — 36 - Automatic Tuning
37 — 42 - Checking Calibration
43 - Service Mode
In software revisions 3.9 and later, the numbers have changed due to the addition
of 2 more states. (‘I’ + 2 numbers).
00 - First Power
01 - Power Up
02 - Power Up
03 - Power Up
{ States 4 - 11 are for Vacuum Mode, Auto-Ranging}
04 - Standby
05 - Standby
06 - Roughing Testport
07 - Gross Mode Leak Testing
08 - Reverse Rough Close Delay
09 - Reverse Mode Leak Testing
10 - Direct Rough Close Delay
11 - Direct Mode Fine Leak Testing
{ States 12 - 19 are for Vacuum Mode, Manual-Ranging}
12 - Standby
13 - Standby
14 - Roughing Testport
15 - Gross Mode Leak Testing
16 - Reverse Rough Close Delay
17 - Reverse Mode Leak Testing
18 - Direct Rough Close Delay
19 - Direct Mode Leak Testing
{ States 20 - 23 are for Sniffer Mode, Auto-Ranging}
20 - Standby
21 - Standby
1109-186-00 Rev. C d-iv