Vacuum Instrument Corp.
2099 Ninth Avenue
Ronkonkoma, NY 11779
631.737.0900
‘O’ - Followed by 3 numbers.
Anode Voltage measured in Volts.
(e.g. 265 = 265 Volts)
(e.g. 310 = 310 Volts)
‘P’ - Followed by 1 to 2 numbers.
For VIC’s internal use only!
In software revisions 3.8 and later, this field is fixed at 3
characters.
(‘P’ + 2 numbers).
‘Q’ - Followed by 1 to 2 numbers.
For VIC’s internal use only!
In software revisions 3.8 and later, this field is fixed at 3
characters.
(‘Q’ + 2 numbers).
‘R’ - Followed by 1 to 2 numbers.
For VIC’s internal use only!
In software revisions 3.8 and later, this field is fixed at 3
characters.
(‘R’ + 2 numbers).
‘S’ - Followed by 4 to 5 characters.
Restricted or Gross Flow Gain (G1).
(e.g. 2.00 = 2.00 x gain)
(e.g. 10.00 = 10.00 x gain)
In software revisions 3.8 and later, this field is fixed at 5 characters.
(‘S’ + 4 numbers).
(e.g. 0971 = 9.71 x Gain)
‘T’ - Followed by 4 to 5 characters.
Reverse Flow Gain (G2).
(e.g. 2.00 = 2.00 x gain)
(e.g. 10.00 = 10.00 x gain)
In software revisions 3.8 and later, this field is fixed at 5
Characters.
(‘T’ + 4 numbers).
(e.g. 0971 = 9.71 x gain)
1109-186-00 Rev. C d-vii
To Next Page
Loading...