In this menu item, the PIN is activated/deactivated perma-
nently. Entering a 4-digit PIN protects the sensor data against
unauthorized access and unintentional modifications. If the PIN
is activated permanently, it can be deactivated temporarily (i.e.
for approx. 60 min.) in any menu item. The instrument is
delivered with the PIN set to 0000.
PIN
Disable permanently?
Only the following functions are permitted with activated PIN:
l Select menu items and show data
l Read data from the sensor into the indicating/adjustment
module.
Menu section, info
In this menu item the most important sensor information can be
displayed:
l Sensor type
l Serial number: 8-digit number, e.g. 12345678
Sensor type
MaihakPULS 400
Serial number
12345678
l Date of manufacture: Date of the factory calibration, e.g.
16. March 2006
l Software version: Edition of the sensor software, e.g. 3.32
Date of manufacture
14. December 2005
Software version
3.30
l Date of last change using PC: Date of the last change of
sensor parameters via PC, e.g. 16. March 2006
Last change using PC
14. December 2005
l Sensor details, e.g. approval, process fitting, seal, meas-
uring cell, measuring range, electronics, housing, cable
entry, plug, cable length etc.
PIN
Info
20 Indicating and adjustment module PLICSCOM
Setup
27835-EN-070123
To Next Page
Loading...
