Vega VEGACONNECT - 10 Supplement; 10.1 Technical data

20
10 Supplement
VEGACONNECT • Wired interface adapter with connection box
66081-EN-211221
10 Supplement
10.1 Technical data
Note for approved instruments
The technical data in the respective safety instructions are valid for approved instruments (e.g. with
Exapproval).Insomecases,thesedatacandierfromthedatalistedherein.
All approval documents can be downloaded from our homepage.
Materials and weights
Materials
Ʋ Housing connection box PBT/PC Blend
Ʋ VEGACONNECT 4 PPE
Weight incl. cables/accessory 333 g (0.74 lbs)
Electrical data
Voltage supply from USB interface 5 V
Max. power consumption 500 mW
Galvanic separation between – HART - USB
– I²C bus - USB
Ambient conditions
Permissible ambient temperature -20 … +60 °C (-4 … +140 °F)
Storage and transport temperature -40 … +80 °C (-40 … +176 °F)
Electrical protective measures
Protection rating
Ʋ Junction box IP20, NEMA TYPE 1
Ʋ VEGACONNECT 4 IP40, NEMA TYPE 1
Connection cable
USB cable
Ʋ Connection to USB interface of the PC
Ʋ Cable length 200 cm (78 in)
Ʋ Plug connection Plug USB-A - Plug USB-C
Ʋ Cable insulation min. 0.65 mm (0.256 in)
I²C bus cable
Ʋ Connection to I²C bus interface
Ʋ Cable length 30 cm (11,8 in)
Ʋ Plug connection I²C bus plug
Cable with 2 mm pins
Ʋ Connection to CONNECT sockets, HART resistor/cable
Ʋ Cable length 150 cm (59 in)
Ʋ Plug connection 2 x 2 mm male connector