Need help?Do you have a question about the Vega VEGAFLEX 61 and is the answer not in the manual?
General| Accuracy | ±2 mm |
|---|---|
| Measuring principle | Guided radar (TDR) |
| Measuring range | Up to 75 m (246.1 ft) |
| Process temperature | -40 to +200 °C |
| Process pressure | Up to 40 bar |
| Output signal | 4 ... 20 mA/HART |
| Protection class | IP66/IP68 (1 bar) |
| Material | 316L, Alloy C22 |
Details the manual's purpose, covering mounting, connection, setup, maintenance, and fault rectification.
Explains symbols, icons, and warning types (Caution, Warning, Danger) for user guidance.
Emphasizes adherence to regulations, proper operation, and operator responsibility for safe use.
Highlights the importance of environmental protection and observing specific manual instructions.
Lists the components of the VEGAFLEX 62 and accompanying documentation included in delivery.
Describes how the sensor measures level using high-frequency microwave pulses.
Guides on ensuring process compatibility, selecting position, and handling the instrument during installation.
Provides detailed guidance on probe placement, vessel wall clearance, and installation in specific vessel types.
Outlines safety instructions and requirements for connecting the power supply and signal.
Details the sequence of steps for physically connecting the device wiring to terminals.
Illustrates the electrical connections for a single chamber housing setup.
Explains how to attach and detach the indicating and adjustment module to the sensor.
Describes the LC display and adjustment keys (OK, ->, +, ESC) and their functions.
Guides through initial setup, address setting, and parameter adjustments for measurement.
Details how to connect the sensor to a PC using VEGACONNECT for configuration.
Refers to external documentation for detailed setup using PACTware software and DTMs.
Provides steps to identify and resolve malfunctions, including checking signals and error messages.
Explains procedures for shortening or replacing the probe's cable or rod.
Guides on how to replace a defective electronics module and load sensor settings.
Outlines essential precautions and steps for safely removing the instrument from its installation.
Provides information on recycling and proper disposal of the instrument according to regulations.
Lists comprehensive technical details, materials, accuracy, and environmental conditions.
Presents dimensional drawings for different housing types and configurations.
States that VEGA product lines are protected by industrial property rights globally.
To Next Page
