Need help?Do you have a question about the Vega VEGAPULS 61 and is the answer not in the manual?
General| Frequency | 80 GHz |
|---|---|
| Communication interface | HART, PROFIBUS PA, Foundation Fieldbus |
| Process temperature | -40 to 80 °C |
| Output signal | 4 … 20 mA/HART - PROFIBUS PA - Foundation Fieldbus |
| Accessory Type | Level sensor |
| Material | PTFE |
| Process fitting | G 1½, 1½ NPT, Flange |
| Purpose | Level measurement in liquids and solids |
| Accuracy | ± 1 mm |
| Protection class | IP66 |
| Housing material | Aluminum |
Safety instructions, voltage supply, connection cable, and cable glands.
Explains connection via spring-loaded terminals and contact pins.
Instrument adaptation via parameter adjustment menu.
Step-by-step guide to set the minimum adjustment (0% level).
Step-by-step guide to set the maximum adjustment (100% level).
Connects PC to sensor/Modbus electronics via adapter or USB.
Adjusts instrument parameters using PACTware software and DTM.
Table of error codes, causes, rectification for failure messages.
Instructions for replacing a defective electronics module.
To Next Page
