Need help?Do you have a question about the Vega VEGAPULS 68 and is the answer not in the manual?
General| Frequency range | 80 GHz |
|---|---|
| Communication | HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Process temperature | -40°C to +200°C |
| Process pressure | -1 to +40 bar |
| Protection class | IP68 |
| Housing material | Stainless steel |
Provides information for mounting, connection, setup, maintenance, and fault rectification.
Specifies that operations must be performed by trained, authorised personnel.
General safety guidelines and regulations that must be observed by the user.
Explains how the VEGAPULS 68 radar sensor measures level in bulk solids and liquids.
General guidelines for mounting the instrument, including tightening and protection.
Safety instructions, voltage supply, and requirements for connection cables and glands.
Step-by-step procedure for connecting the voltage supply and signal output.
Adjusting the distance for full and empty vessel levels for accurate indication.
Procedure for connecting the PC to the sensor via the interface adapter.
Adjusting instrument parameters using PACTware configuration software.
Table of error codes, reasons, and rectifications for failure status messages.
Provides procedures for identifying and rectifying common measurement errors.
Step-by-step guide for replacing a defective electronics module.
To Next Page
