Vega VEGAFLEX 80 series - Page 11

11
5 Setup
VEGAFLEX 80 series • Two-wire 4 … 20 mA/HART
42960-EN-170410
The exact process is described in the operating instructions.
The instrument is shipped in locked condition!
For verication, all modied, safety-relevant and non safety-relevant
parameters are shown.
The verication texts are displayed either in German or, when any
other menu language is used, in English.
Warning:
When adjustment is unlocked, the safety function must be considered
as unreliable. This applies until the parameters are veried and the
adjustment is locked again. If the parameter adjustment process is
not carried out completely, the device statuses described in the oper-
ating instructions must be taken into consideration.
If necessary, you must take other measures to maintain the safety
function.
Warning:
In case a reset to "Delivery status" or "Basic adjustment" is carried
out, all safety-relevant parameters must be checked or set anew.
Unsafe device
status
Instrument reset