25
3) Press OK to confirm selection and press Menu Setup
back to preview status. Then press Capture (8) to
start auto capture. When at auto capture status, there
is
at the left corner of the screen.
4) When all frames captured, microscope will return to
normal preview.
5) If you need to stop auto capture during the capture
process, press Capture one time.
Interval capture is only effective in still image capture
mode.
5.1.3 Quality
From the main menuⅠ, choose Quality and then
select among Super Fine/Fine/Normal.
The three selections will result in different image
compress ratio.
To Next Page
Loading...
