Need help?Do you have a question about the Velex VX301 and is the answer not in the manual?
General safety precautions and warnings for using the DAB+ radio.
Identifies the power button and its function as a menu selector.
Location for connecting the power supply cable.
Input jack for external audio sources.
Output jack for connecting to other audio devices.
Button used to cycle through different operating modes.
Button for FM transmission scanning and DAB+ channel scanning.
Button for preset stations and managing phone calls.
Button to change channels or skip tracks.
Integrated microphone for hands-free calling.
Port for connecting the DAB+ antenna.
The screen showing device status and information.
Instructions for installing the unit and connecting power via car charger.
Connecting the antenna and turning on the DAB+ unit.
Procedure for scanning and saving available DAB+ radio channels.
How to navigate and select scanned DAB+ radio channels.
Proper placement and adhesion of the antenna film on the windscreen.
Attaching the amplifier block to the car's A-pillar for grounding.
Critical considerations for antenna placement and cable routing.
How to select the internal speaker for audio output.
Connecting the unit to the car stereo via the 3.5mm audio cable.
Procedure to select a vacant FM frequency for audio transmission.
Steps to find and scan available DAB+ radio channels.
Details displayed while listening to DAB+, such as channel name and signal strength.
How to save and select preferred DAB+ radio stations.
Step-by-step guide to connect a phone for hands-free and audio streaming.
Using the 3.5mm Aux-In jack for audio input.
How to change the background and font colours of the display.
Procedure for changing the language displayed on the unit.
Steps to restore the device to its original factory settings.
How to view the current software version of the DAB+ receiver.
To Next Page
General