To Next PageTo Next Page
Need help?Do you have a question about the Velleman DVM2000 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Diode Test | Yes |
| Display | LCD |
| Measurement Functions | DC Voltage, AC Voltage, DC Current, Resistance, Continuity, Diode |
| DC Voltage Accuracy | ± 0.5% of reading ± 2 digits |
| DC Current Range | 200µA, 2mA, 20mA, 200mA, 10A |
| DC Current Accuracy | ±(1.0% + 1 digit) |
| Resistance Range | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Resistance Accuracy | ± 0.8% of reading ± 2 digits |
| Continuity Test | Yes |
| Battery | 9V battery |
| DC Voltage Range | 200mV, 2V, 20V, 200V, 1000V |
Instructions for measuring AC voltage and dBm values, including safety limits.
Steps for measuring DC and AC voltages, including voltage limits.
How to perform measurements for millivolt ranges of DC and AC voltage.
Procedure for measuring logic frequency and duty cycle parameters.
Instructions for testing the forward voltage drop of diodes.
How to measure resistance and perform continuity checks.
Steps for measuring capacitance values, including capacitor discharge.
