To Next Page
J
jwebsterAug 12, 2025
How to fix Velleman DVR no power?
- JJustin PowellAug 12, 2025
If your Velleman DVR has no power, check the power cord and the mains.
How to fix Velleman DVR no power?
If your Velleman DVR has no power, check the power cord and the mains.
What to do if Velleman DVR has no live video?
If there is no live video on your Velleman DVR, verify the camera and monitor video cables and connections. Also, check the power supply to the camera and the setting of the camera lens.
Why does my Velleman DVR keep rebooting?
If your Velleman DVR keeps rebooting, place the HDD near the power connector or replace the HDD.
What to do if Velleman DVR HDD failure?
In case of HDD failure of Velleman DVR, try testing with another HDD and another HDD cable. Also, make sure the HDD 'Master' and 'Slave' mode is set correctly.
What to do if the Velleman DVR4MQAEE is not working when pressing any button?
If your Velleman DVR is not working when pressing any button, check if the device is under KEY LOCK mode. If so, press any key and key in the password to exit the KEY LOCK mode.
Why is timer record not working on my Velleman DVR4MQAEE DVR?
If the TIMER RECORD is not working on your Velleman DVR, check if the RECORD mode is enabled.
Why cannot view the Velleman DVR4MQAEE DVR over the network with a web browser?
If you cannot view the Velleman DVR over the network with a web browser, update the JAVA programme and the firmware of the software AP.
Why Velleman DVR4MQAEE cannot be switched on when two Seagate power-saving HDDs are installed?
If your Velleman DVR cannot be switched on successfully when two Seagate power-saving HDDs are installed, do not use 2 Seagate power-saving HDDs simultaneously.
Steps and guidelines for connecting cameras, monitors, and other devices to the DVR.
Initial setup procedures after installation, including HDD setup and system time configuration.
Detailed guide on configuring motion detection sensitivity levels and parameters.
Explanation of the DVR's recording modes: manual, event, and timer recording.
Instructions on how to play back recorded videos, including fast forward, rewind, and pause functions.
Configuration options for motion detection setup, including sensitivity and area settings.
Network configuration options for static IP, DHCP, and PPPoE settings.
Details on installing and operating the licensed software for remote access and control.
An overview of the web server interface for remote monitoring and control.
General