Total solder points: 45
Skill level :
Beginner 1þ 2o 3o 4o 5o Advanced
ILLUSTRATED MANUAL H4003P-ED1
2x30W STEREO AMPLIFIER
K4003
Features:
þ The easy way to add quality stereo amplification to your project
þ Excellent sound quality
þ Low noise, low distortion
þ Short circuit and overload protected (1h max.)
þ On-board rectifier and smoothing capacitor
þ Just add a center tap transformer
þ Complete with heatsink
Specifications :
þ Max. output power : 2 x 15W/4 ohm - 2 x 10W/8 ohm
þ Harmonic distortion : 0.07% (1W/1kHz)
þ Channel separation : 70dB
þ Freq. response : 7Hz to 60kHz (-3dB)
þ Signal/noise ratio : 98dB (A weight)
þ Input sensitivity : 300mV / 20Kohm
þ Power supply : 2 x 12V / 2A (50W centertap transformer)
þ Dimensions : 69 x 51mm / 2.7” x 2”
modifications reserved
To Next Page
Need help?
General
