11
1. Turn on the Receiver by pressing and
holding the Power button until the
LED lights up.
2. Set the Transmitter to Bulb mode.
3. Set your camera to the Continuous
Shots setting.
4. Press and hold the Transmitter’s
shutter release button halfway to wake
or focus your camera (if set to Auto
Focus).The LED will turn green.
5. A full press of the Transmitter’s shutter
button will trigger the camera to take
continuous photos until you half press
or fully press the shutter button again.
CONTINUOUS MODE | WIRELESS
To Next Page
Loading...
Need help?
General
