13
1. Turn on the Receiver by pressing and
holding the Power button until the LED
lights up.
2. Set the Transmitter to Bulb Shooting.
3. Set your camera to the Bulb setting.
4. Press and hold the Transmitter’s
shutter release button halfway to wake
or focus your camera (if set to Auto
Focus). The LED will turn green.
5. Fully depress the Transmitter’s shutter
button. The LED on the Transmitter
will flash red and the LED on the
receiver will turn solid red. The shutter
will remain open until you half-press or
fully press the shutter button again.
BULB MODE (LONG EXPOSURE) | WIRELESS
To Next Page
Loading...
