Short-circuit wires (1 second) in the double input which is to control the
chosen product(s). The light-emitting diode flashes green.
Note: When short-circuiting the same input again, previous configura-
tions will be replaced. This means that if a product is to be added to a
group which has already been configured, all the products in the group
have to be added again.
When the white light-emitting diode is on, interface KLF 200 has been
configured as an interface.
Note: If you want to add more products to the interface, repeat steps
1-4.
Press the RESET button on the back of the interface briefly (1 second)
with a pointed object. The light-emitting diode flashes white.
Step 4 must now be carried out within 2 minutes.
Function as interface
Registration with VELUX INTEGRA
®
control keypad KLI 110
Function as interface
Registration with VELUX INTEGRA
®
control keypad KLI 110
5
4
3
To Next Page
Loading...
